Mini Sugar Plants

Mini Sugar Plant of 500/ 1250 TCD Capacity

Capitalizing on our industry experience, we offer a wide range of Mini Sugar Plant of 500 TCD Capacity. Our range has the capacity of crushing 500 tones per day using the vacuum pan route and pressure-boiling route, similar to large-scale plants having smaller equipment and machinery. Sugar produced from this Mini Sugar Plant is also similar to bigger sized plants.

Moreover, the existing Khandasari units (Open pan process) may also be converted into Mini sugar plants. Recently, the Government of India has allowed to use the vacuum pan and pressure boiling system with tandem milling systems for all Khandasari Units, which makes it a smaller capacity sugar unit.

In addition, the capital investment on this Smaller Capacity Unit is also very less and it is convenient to install this sugar plant where availability of cane is abundant.

Our range of 500 TCD Capacity Mini Sugar plant can crush 80,000 tonnes of sugarcane in 160 days, which can be supplied in 2000 acres (average yield of 40 Tones/acres of cane growing over).

Following are the advantages of these plants:

• Low Capital Investment
• Less area under Sugarcane
• Less requirement of Sugarcane
• Operation & control of the plant will be easier
• This is no levy to be paid to the government
• Since availability of cane is from nearby sources of the plant, fresh cane can be crushed, which will give better recovery

Cane Crusher

The cane stalks are fed to the Main Cane Carrier from where it passes through Cutter-I & Cutter –II to chop the Cane fibers.This then passes through fibrizer which shreds the cane into fine fibers & drops these fine fibers to the below placed belt conveyor from where it is carried to the feed Rake Carrier. This Carrier then conveys the fine chopped Cane fibers to the first Mill through its Donnelly chute placed before the first Mill.  After passing through the first Mill the bagasse passes to the subsequent Mills for further juice extraction through a series of Inter Rake Carrier & Donnelly Chute. The final bagasse after the last Mill is the discharged to suitable Bagasse Carrier.
 

Model	Size of Roller in the Mill (Dia x Length x No. of Roller ) Inch x Inch x No.	Capacity of Cane Crushing (Tons per Hour)	Power Required (HP)
ME-12X14X9	12 X 14 X 9 Roller	5	115
ME -13X18X6	13 X 18 X 6 Roller	7.5	100
ME -14X21X9	14 X 21 X 9 Roller	10	160
ME -16X24X6	16 X 24 X 6 Roller	15	135
ME -16X24X9	16 X 24 X 9 Roller	20	210
ME -18X30X9	18 X 30 X 9 Roller	25	280
ME -16X24X12 +FIB	16X24X 12 Roller with TRPF/GRPF & Fibrizer	25	800
ME -18X30X12 +FIB	18X30X 12 Roller with TRPF/GRPF & Fibrizer	38	1080
ME -20X40X12 +FIB	20X40X 12 Roller with TRPF/GRPF & Fibrizer	50	1500
ME -24X40X15 +FIB	20X40X 15 Roller with TRPF/GRPF & Fibrizer	75	2500